Guard Rail :
Replace your railing every 10 years for the obvious safety reasons. We offer you a new guard rail for your boat for a great price, just put in your measurements and we will make a new guard rail for you and sent it to you. Available in 4 mm and 5 mm wire ripe and with-or without white PVC coating. You can choose between guard rail with an eye (option 1: eye-fork) or guard rail with a rigging screw (optoin 2: rigging screw - fork). Option 1 comes with a dyneema lash.
Most commonly used is the top guard rail in 5 mm, and the lower in 4 mm wire rope. Do also check your class rules when sailing regatta's in order to comply with the class rules to measurements.
|Fork terminal||Terminal with railing eye||Turnbuckle|
How to measure the guard rail?
Option 1: Eye - Fork, measured on the inside of the eye up to and including heart of the fork, this length is specified in the order. For the rope lash may be held 10-15 cm for adequately adjusting possibility.
Option 2: Spanner - Universal, measuring clevis pin at heart of the tensioner t / m heart as confirmed on the ship, this length is specified in the order. The new guard rail comes with the tension half screwed on properly both sides suggest possibilities.
It is also possible make the guard rail out of Dyneema, do make sure the pullpits feeds have rounded edges to envoided incision. The constructon of the splicing has to be done on locaton. For further explantion of the possibilies please contact us.
Note: dyneema guard rail is in most classes not allowed.