Blocks

Items 1-20 of 89

Page
per page
Shop By
  1. 50mm Protexit block Trough Deck
    SKU: HK1203
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
  2. 57mm Carbo HTE ratchamatic block
    SKU: HK2625HTE
    The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.

    The spring on the HTE (high-threshold engage) version of the 57 mm Carbo Ratchamatic blocks was made stiffer to delay the point where the ratchet engages, allowing the block to run free more of the time. The ratchet function engages at higher loads to allow the old kite sheet to run free for crisper gybes.

    Standard grip: medium/light air; 10:1 holding power.
    Learn More
  3. 75mm Carbo ratchamatic block 2x grip
    SKU: HK2177
    Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.

    The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.

    2x grip: breeze–on/puffs; 30:1 holding power
    Learn More
  4. 75mm Carbo ratchet block 2x grip
    SKU: HK2176
    Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
    Learn More
  5. 40mm FLY Block
    SKU: HK2173
    Harken soft-attach Fly blocks are designed to provide strength without mass, providing sailors with big power in a low-aero package. Designed specifically for high-tech line, these efficient blocks have an incredible working load for their small size. Learn More
  6. 29mm FLY Block
    SKU: HK2171
    Harken soft-attach Fly blocks are designed to provide strength without mass, providing sailors with big power in a low-aero package. Designed specifically for high-tech line, these efficient blocks have an incredible working load for their small size. Learn More
  7. 57mm Carbo T2 ratchamatic block 2x grip
    SKU: HK2170
    Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip. Learn More
  8. 57mm Carbo ratchet block 2x grip
    SKU: HK2169
    Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip. Learn More
  9. 57mm Carbo HTE ratchamatic block 2x grip
    SKU: HK2168HTE
    The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
    Learn More
  10. 57mm Carbo ratchamatic block 2x grip
    SKU: HK2168
    Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
    Learn More
  11. 60mm Protexit block Trough Deck
    SKU: HK1204
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.

    Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
    Learn More
  12. 40mm Protexit block Trough Deck
    SKU: HK1202
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
  13. 30mm Protexit block Trough Deck
    SKU: HK1200
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
  14. 29mm Carbo stand-up block
    SKU: HK349
    The 29 mm Harken Carbo stand-up block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 31 grams. Learn More
  15. 29mm Carbo block
    SKU: HK340
    The 29 mm Harken Carbo block can be used for lines up to 8mm. This block has a max. working load of 150 kg, a breaking load of 454 kg and weighs just 26 grams. Learn More
  16. 29mm Carbo block with becket
    SKU: HK341
    The 29 mm Harken Carbo block with becket can be used for lines up to 8mm. This block has a max. working load of 150 kg, a breaking load of 454 kg and weighs just 28 grams. Learn More
  17. 29mm Carbo fixed blok
    SKU: HK348
    The 29 mm Harken Carbo fixed block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 23 grams. Learn More
  18. 29mm Carbo cheek block
    SKU: HK350
    The 29 mm Harken Carbo cheek block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 17 grams. Learn More
  19. 29mm Carbo 90° fixed head block
    SKU: HK352
    The 29 mm Harken Carbo fixed head block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 26 grams. Learn More
  20. 29mm Carbo pivoting lead block
    SKU: HK395
    The 29 mm Harken Carbo pivoting lead block can be used for lines up to 6mm. This block has a max working load of 91 kg, a breaking load of 295 kg and weighs just 90.7 grams. Learn More

Items 1-20 of 89

Page
per page