Blocks

Shop By

Items 1-20 of 23

  1. 20mm Ball Bearing Cheek Block
    SKU: SE40210113R

    BALL BEARING BLOCKS

    Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.

    Learn More
    €11.40 €11.40
  2. 22mm micro cheek block
    SKU: HK233
    Harken 22 mm Micro cheek block is compact and lightweight and can be used for lines up to 6mm. Great for smaller sailingboats and boats up to 30 foot, mostly used for trimlines and control lines. Have a working load of 91 kg and weight only 21 gram. Learn More
    €20.25 €20.25
  3. 29mm Carbo cheek block
    SKU: HK350
    The 29 mm Harken Carbo cheek block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 17 grams. Learn More
    €17.40 €17.40
  4. 16mm cheek block
    SKU: HK416
    The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 12 gram. Learn More
    €20.55 €20.55
  5. 16mm Airblock cheek pivot
    SKU: HK432
    The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 339 kg and it weights just 11 gram. Learn More
    €21.90 €21.90
  6. 57mm Carbo cheek block with ratchet
    SKU: HK2137
    Harken 57mm Carbo turtle block with ratchet. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weighs 71 gram. Max workload is 227 kg and breaking strength is 907 kg. Learn More
    €95.49 €95.49
  7. 57mm Carbo cheek block
    SKU: HK2606
    Harken 57 mm Carbo cheek block can be used for lines up to 10 mm and weighs 68 gram. Great for main sheets and jib sheet. Has a safe working load of 359 kg and a breaking strength of 1079 kg. Learn More
    €51.99 €51.99
  8. 40mm Carbo cheek block with ratchet
    SKU: HK2614
    Harken 40 mm Carbo cheek block are great for sheeting systems on smaller boats and trim lines on big boats. Max line for this block is 10 mm, it has a safe working load of 136 kg, a breaking strength of 454 kg and weights just 44 gram. Learn More
    €82.49 €82.49
  9. 57mm Carbo cheek block with automatic ratchet block
    SKU: HK2633
    Harken 57mm Carbo cheek block with automatice ratchet block. Great for sheetingsystems and downhalls. Use line up to 10 mm and the block weights 89 gram. Max workload is 227 kg and breaking strength is 907 kg. Learn More
    €127.95 €127.95
  10. 40mm Carbo cheek block
    SKU: HK2644
    This Harken 40 mm Carbo cheek block is suitable for sheeting systems of small boats and trim lines for big boats. Use a max. line of 10 mm. It has a safe workload of 220 kg, a breaking strength of 735 kg and it weighs 34 gram. Learn More
    €37.25 €37.25
  11. 75mm Carbo Cheek Ratchet block
    SKU: HK2672
    Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Learn More
    €105.95 €105.95
  12. 75mm Carbo cheek block with automatic ratchet block
    SKU: HK2682
    Harken 75 mm Carbo cheek block with automatic ratchet block. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 12 mm and weighs 184 gram. Has a max workload of 341 kg and a breaking strength of 1361 kg. Learn More
    €180.95 €180.95
  13. Bullet Block Wire Cheek
    SKU: HK109
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Wire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance. Learn More
    €31.00 €31.00
  14. 30mm Ball Bearing Cheek Block
    SKU: SE40310109R
    BALL BEARING BLOCKS
    Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
    Learn More
    €16.20 €16.20
  15. 40mm Ball Bearing Cheek Block
    SKU: SE40410117R
    BALL BEARING BLOCKS
    Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
    Learn More
    €24.15 €24.15
  16. Series 20 BB Block, Single Cheek, Rivet Mount
    SKU: RF20151A
    Suitable for screw or pop rivet mounting Learn More
    €21.45 €21.45
  17. Series 30 BB Orbit Block, Cheek Block RF35151
    SKU: RF35151
    Base suits curved mounting base Learn More
    €17.40 €17.40
  18. Series 40 BB Orbit Block, Cheek RF45151
    SKU: RF45151
    Base suits curved mounting surface. Low mounting points for maximum strength Learn More
    €32.00 €32.00
  19. Series 40 RTA OrbitBlock,Cheek,Clockwise Rotation
    SKU: RF46151
    Clockwise rotation. Fully automatic, load sensing ratchet engagement. Recessed underside to suit curved mounting surface. Low mounting points for maximum strength Learn More
    €72.49 €72.49
  20. Series 40 RTA OrbitBlock, Cheek, Anti-Clockwise Rotation
    SKU: RF46151A
    Anti-clockwise rotation. Fully automatic, load sensing ratchet engagement. Recessed underside to suit curved mounting surface. Low mounting points for maximum strength Learn More
    €72.49 €72.49
Page
per page

Send us a message via Whatsapp

Chat with us