Blocks

Shop By

Items 1-20 of 68

  1. 50mm Protexit block Trough Deck
    SKU: HK1203
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
    €146.95 €146.95
  2. 30mm Protexit block Trough Deck
    SKU: HK1200
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
    €93.49 €93.49
  3. 30mm Protexit block Trough Deck double
    SKU: HK1201
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
    €113.95 €113.95
  4. 40mm Protexit block Trough Deck
    SKU: HK1202
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
    €126.95 €126.95
  5. 60mm Protexit block Trough Deck
    SKU: HK1204
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.

    Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
    Learn More
    €161.95 €161.95
  6. Element 45mm Block stand-up
    SKU: HK6250
    Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
    Learn More
    €135.95 €135.95
  7. Element 45mm Block stand-up/becket
    SKU: HK6251
    Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
    Learn More
    €145.95 €145.95
  8. Element 60mm Block stand-up
    SKU: HK6277
    Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
    Learn More
    €174.95 €174.95
  9. Element 60mm Block stand-up/becket
    SKU: HK6278
    Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
    Learn More
    €186.95 €186.95
  10. Element 80mm Block stand-up
    SKU: HK6280

    Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.

    Learn More
    €345.95 €345.95
  11. Through-Deck Bullet Block 5mm (#10) RH Fasteners
    SKU: HK287
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
    €41.75 €41.75
  12. Wire through-deck Bullet Block 5mm (#10) RH Fasteners
    SKU: HK288
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Learn More
    €48.75 €48.75
  13. In-Line exit Bullet Block 5mm (#10) RH Fasteners
    SKU: HK289
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
    €58.99 €58.99
  14. Double upright Bullet Block 5mm (#10) RH Fasteners
    SKU: HK220
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
    €50.99 €50.99
  15. Upright Big Bullet Block 5mm (#10) RH Fasteners
    SKU: HK222
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
    €48.50 €48.50
  16. Double upright Big Bullet Block 5mm (#10) RH Fasteners
    SKU: HK223
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
    €85.99 €85.99
  17. Through-deck Dinghy Block 4mm (#8) RH Fasteners
    SKU: HK046
    Low-profile Dinghy blocks are compact and lightweight, with fast trim and release under high or low loads. Blocks are designed for dinghies and for light-duty control lines on larger boats. Learn More
    €59.49 €59.49
  18. Through Deck Bullet Block 5mm (#10) FH Fasteners
    SKU: HK088
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
    €28.25 €28.25
  19. In-Line Exit Bullet Block 5mm (#10) FH Fasteners
    SKU: HK089
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
    €44.75 €44.75
  20. Upright Bullet Block 5mm (#10) RH Fasteners
    SKU: HK096
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
    €28.50 €28.50
Page
per page

Send us a message via Whatsapp

Chat with us