Blocks

Items 1-20 of 34

Page
per page
Shop By
  1. 50mm Protexit block Trough Deck
    SKU: HK1203
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
  2. 60mm Protexit block Trough Deck
    SKU: HK1204
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.

    Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
    Learn More
  3. 40mm Protexit block Trough Deck
    SKU: HK1202
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
  4. 30mm Protexit block Trough Deck double
    SKU: HK1201
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
  5. 30mm Protexit block Trough Deck
    SKU: HK1200
    When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
  6. 22mm Micro block through - deck
    SKU: HK242
    Harken 22 mm Micro block in-dek is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 28 gram. Learn More
  7. 22mm Micro fiddle with V-jam
    SKU: HK244
    Harken 22 mm Micro fiddle with V-jam is compact and lightweight and can be used for lines up to 6mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 57 gram. Learn More
  8. Through-Deck Bullet Block 5mm (#10) RH Fasteners
    SKU: HK287
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
  9. Wire through-deck Bullet Block 5mm (#10) RH Fasteners
    SKU: HK288
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Learn More
  10. In-Line exit Bullet Block 5mm (#10) RH Fasteners
    SKU: HK289
    Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
  11. 16mm airblock - In-line exit block
    SKU: HK368
    The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 27 gram. Learn More
  12. 16mm Airblock through-deck
    SKU: HK421
    The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 18 gram. Learn More
  13. 57mm Carbo fiddle block
    SKU: HK2621
    Harken 57mm Carbo fiddle can be used for lines up to 10mm and weighs 105 gram. Great for mainsheets and trimlines. Has a safe working load of 359 kg and a breaking strength of 1080 kg. Learn More
  14. 57mm Carbo fiddle with cam cleat
    SKU: HK2623
    Harken 57mm Carbo fiddle with cam cleat can be used for lines up to 10mm and weighs 286 gram. Great for mainsheets and trimlines. Has a safe working load of 359 kg and a breaking strength of 1080 kg. Learn More
  15. 40mm Carbo fiddle
    SKU: HK2655
    Harken 40 mm Carbo fiddle. Great for down hauls and sheeting systems on small boats. Max. rope diameter for this block is 10 mm, has a max. workload of 220 kg , a breaking strength of 735 kg and weighs 51 gram. Learn More
  16. 40mm Carbo fiddle with cam cleat
    SKU: HK2657
    Harken 40 mm Carbo fiddle block with cam cleat. Great for down hauls and sheeting systems on small boats. Max. for this block is 6 mm, has a max. workload of 220 kg and a breaking strength of 735 kg. Learn More
  17. 57mm Carbo fiddle with ratchet
    SKU: HK2673
    Harken 57mm Carbo fiddle with ratchet. Great for sheetingsystems and downhalls. Use line up to 10 mm and the block weighs 113 gram. Max workload is 360kg and breaking strength is 1080 kg. Learn More
  18. 57mm Carbo fiddle with ratchet and cam cleat
    SKU: HK2675
    Harken 57mm Carbo fiddle with ratchet and cleat. Great for sheetingsystems and downhalls. Use line up to 10mm and the block weights 294 gram. Max workload is 360 kg and breaking strength is 1080 kg. Learn More
  19. 75mm Carbo fiddle
    SKU: HK2690
    Harken 75 mm Carbo fiddle. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 14 mm and weights 238 gram. Has a max workload of 550 kg and a breaking strength of 1650 kg. Learn More
  20. 75mm Carbo fiddle with cam cleat
    SKU: HK2692
    Harken 75 mm Carbo fiddle with cam cleat. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 12 mm and weights 424 gram. Has a max. workload of 408 kg and a breaking strength of 1020 kg. Learn More

Items 1-20 of 34

Page
per page