Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€146.95 €146.95
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€93.49 €93.49
-
30mm Protexit block Trough Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€113.95 €113.95
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€126.95 €126.95
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More€161.95 €161.95
-
22mm micro cheek blockSKU: HK233Harken 22 mm Micro cheek block is compact and lightweight and can be used for lines up to 6mm. Great for smaller sailingboats and boats up to 30 foot, mostly used for trimlines and control lines. Have a working load of 91 kg and weight only 21 gram. Learn More€20.25 €20.25
-
22mm Micro block through - deckSKU: HK242Harken 22 mm Micro block in-dek is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 28 gram. Learn More€35.75 €35.75
-
Through-Deck Bullet Block 5mm (#10) RH FastenersSKU: HK287Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€41.75 €41.75
-
Wire through-deck Bullet Block 5mm (#10) RH FastenersSKU: HK288Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Learn More€48.75 €48.75
-
In-Line exit Bullet Block 5mm (#10) RH FastenersSKU: HK289Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€58.99 €58.99
-
29mm Carbo cheek blockSKU: HK350The 29 mm Harken Carbo cheek block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 17 grams. Learn More€17.40 €17.40
-
16mm airblock - In-line exit blockSKU: HK368The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 27 gram. Learn More€67.49 €67.49
-
16mm cheek blockSKU: HK416The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 12 gram. Learn More€20.55 €20.55
-
16mm Airblock through-deckSKU: HK421The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 18 gram. Learn More€48.75 €48.75
-
16mm Airblock cheek pivotSKU: HK432The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 339 kg and it weights just 11 gram. Learn More€21.90 €21.90
-
57mm Carbo cheek block with ratchetSKU: HK2137Harken 57mm Carbo turtle block with ratchet. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weighs 71 gram. Max workload is 227 kg and breaking strength is 907 kg. Learn More€95.49 €95.49
-
57mm Carbo cheek blockSKU: HK2606Harken 57 mm Carbo cheek block can be used for lines up to 10 mm and weighs 68 gram. Great for main sheets and jib sheet. Has a safe working load of 359 kg and a breaking strength of 1079 kg. Learn More€51.99 €51.99
-
40mm Carbo cheek block with ratchetSKU: HK2614Harken 40 mm Carbo cheek block are great for sheeting systems on smaller boats and trim lines on big boats. Max line for this block is 10 mm, it has a safe working load of 136 kg, a breaking strength of 454 kg and weights just 44 gram. Learn More€82.49 €82.49
-
57mm Carbo cheek block with automatic ratchet blockSKU: HK2633Harken 57mm Carbo cheek block with automatice ratchet block. Great for sheetingsystems and downhalls. Use line up to 10 mm and the block weights 89 gram. Max workload is 227 kg and breaking strength is 907 kg. Learn More€127.95 €127.95
-
40mm Carbo cheek blockSKU: HK2644This Harken 40 mm Carbo cheek block is suitable for sheeting systems of small boats and trim lines for big boats. Use a max. line of 10 mm. It has a safe workload of 220 kg, a breaking strength of 735 kg and it weighs 34 gram. Learn More€37.25 €37.25
