Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€146.95 €146.95
-
Series 30 HHL Orbit Block,Single & becket, lashing headSKU: RF35109HLThe Ronstan Series 30 Orbit™ Lashing block is the perfect solution for High-load cascade or vang-systems. The maximum working load is 550kgs and the breaking load is 1650kgs.
Learn More€88.49 €88.49
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More€161.95 €161.95
-
Element 60mm Block stand-upSKU: HK6277Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More€174.95 €174.95
-
Element 60mm Block stand-up/becketSKU: HK6278Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More€186.95 €186.95
-
51mm Wire Block SingleSKU: HK308Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Learn More€112.95 €112.95
-
Wire Block CheekSKU: HK309Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Learn More€114.95 €114.95
-
Wire Block Through DeckSKU: HK310Lightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes. Learn More€124.95 €124.95
-
57mm Carbo triple ratchet block with cam cleatSKU: HK2140Harken 57 mm Carbo ratchet block with cam cleat and becket. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weights 435 gram. Max workload is 680 kg and breaking strength is 1700 kg. Learn More€289.95 €289.95
-
57mm Carbo triple ratchet block with cam cleat and becketSKU: HK2141Harken 57 mm Carbo triple ratchet block with cam cleat and becket. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weights 445 gram. Max workload is 816 kg and breaking strength is 2041 kg. Learn More€301.95 €301.95
-
57mm Carbo double blockSKU: HK2602Harken 57 mm Carbo double block can be used for lines up to 10 mm and weighs 178 gram. Great for main sheets and jib sheet. Has a safe working load of 720 kg and a breaking strength of 1500 kg. Learn More€119.95 €119.95
-
57mm Carbo double block with becketSKU: HK2603Harken 57 mm Carbo double block with becket can be used for lines up to 10 mm and weighs 187 gram. Great for mainsheets and jib sheet. Has a safe working load of 720 kg and a breaking strength of 1500 kg. Learn More€130.95 €130.95
-
57mm Carbo triple blockSKU: HK2604Harken 57 mm Carbo triple block can be used for lines up to 10 mm and weighs 255 gram. Great for mainsheets and jib sheet. Has a safe working load of 1080 kg and a breaking strength of 2270 kg. Learn More€167.95 €167.95
-
57mm Carbo triple block with becketSKU: HK2605Harken 57 mm Carbo triple block with becket can be used for lines up to 10 mm and weighs 264 gram. Great for main sheets and jib sheet. Has a safe working load of 1080 kg and a breaking strength of 2270 kg. Learn More€177.95 €177.95
-
57mm Carbo triple block with cam cleatSKU: HK2617Harken 57mm Carbo triple block with cam cleat can be used for lines up to 10mm and weighs 431 gram. Great for mainsheets and trim lines. Has a safe working load of 680 kg and a breaking strength of 1700 kg. Learn More€255.95 €255.95
-
57mm Carbo triple block with cam cleat and becketSKU: HK2618Harken 57mm Carbo triple block with cam cleat and becket, can be used for lines up to 10mm and weighs 442 gram. Great for mainsheets and trimlines. Has a safe working load of 816 kg and a breaking strength of 2040 kg. Learn More€267.95 €267.95
-
57mm Carbo fiddle blockSKU: HK2621Harken 57mm Carbo fiddle can be used for lines up to 10mm and weighs 105 gram. Great for mainsheets and trimlines. Has a safe working load of 359 kg and a breaking strength of 1080 kg. Learn More€67.49 €67.49
-
57mm Carbo triple automatic ratchet block with cam cleatSKU: HK2629Harken 57mm Carbo triple automatic ratchet block with cam cleat. Great for sheetingsystems and downhalls. Use line up to 10 mm and the block weights 421 gram. Max workload is 680 kg and breaking strength is 1700 kg. Learn More€359.95 €359.95
-
57mm Carbo triple automatic ratchet block with cam cleat and becketSKU: HK2630Harken 57mm Carbo triple automatic ratchet block with cam cleat and becket. Great for sheetingsystems and downhalls. Use line up to 10 mm and the block weights 431 gram. Max workload is 816 kg and breaking strength is 2041 kg. Learn More€371.95 €371.95
-
57mm Carbo quad blockSKU: HK2631Harken 57mm Carbo quad block. Great for sheetingsystems and downhalls. Use line up to 10 mm and the block weights 340 gram. Max workload is 1080 kg and breaking strength is 2270 kg. Learn More€215.95 €215.95
