Insulator Swage Stud - Eye

Hi Mod - Petersen Stainless Insulators have an internal ball-socket in the main body that threads onto the connecting stud. The nut is insulated from the stainless steel body by a Tufnol™ socket, preventing electrical transference to the insulator body. The Hi Mod - Petersen Stainless Insulators insulators meets or exceeds current electrical standards for marine backstay insulators.
In stock
SKU
HMRISE
From €227.00
The Failsafe Hi Mod - Petersen Stainless Insulators are engineered with an internal ball-socket in the main body that threads onto the connecting end fitting. The nut is insulated from the stainless steel body by a Tufnol spacer preventing electrical transference to the insulator body or opposite terminal.

Should, for any reason, the Tufnol be compromised, the nut will bottom out against the stainless housing. While the backstay will loosen, the insulating studs will remain attached to the insulator body-allowing the rig to be re-tensioned until a repair can be made.

The Hi Mod - Petersen Stainless insulators meets or exceeds current electrical standards for marine backstay insulators.

The design of the insulators allows for numerous end fitting combinations, available for the following terminal options:
- swageless; (reusable) swageless terminals
- swage terminals: eye, fork, and toggle


Please note : should you wish to order different configuration of your insulator please contact us directly
Specifications
WIRE SIZEPIN SIZEHOLE SIZEC-L (MM)E-L (MM)S-L (MM)F-L (MM)T-L (MM)
51111.1106107101121147
61111.1110107101121147
712.712.7131129120142169
81414.28153151140164212
101616.2159155142176212
121919.05192180168207258
142222.2222207196238297
162525.4258237226271337
More Information
Diameter 6 mm, 7 mm, 8 mm, 10 mm, 12 mm