11 - Barberhauler
Depending on the yacht, there are typically two different situations:
1) Control lines that runs through blocks, with a gear ratio (e.g. 1:4). Here good grip, some flexibility are most important. The Barberhauler needs to be easy to manually handle.
2) Lines in systems, often taking the total load (so without gear). These lines should have higher strength and low elongation to ensure good a sail trim. The sail stays flat with increasing winds. Cruising yachts can use polyester or step up to SK38 Dyneema® or Stirotex® for a Barberhauler.
TN-RacingSKU: PRR340Application: Halyard, Sheet, Control line
This is an high-performance regatta rope and has a core of coated Stirotex fibers. The Technora/polyester cover is suitable for big winches and works very well in clutches. This rope is suitable for splicing and tapering. Learn More€2.49
D-CupSKU: PRR430Application: Halyard, Sheet, Control line
This top quality high performance regatta rope, has a core made of coated Dyneema® SK78 fibers and 24 braid HT Polyester cover. Features: Suitable for splicing and tapering, very low stretch, light weight, great durability. Excellent for halyards. Learn More€2.40
SSRSKU: PRR417Application: Sheet, Control line
This rope is a single braid 16 strands mix from Dyneema SK78 and Cordura. High performance rope specially made for control lines and dinghy sheets. Provides superior grip, low elongation, high strength, very soft and does not knick. Also known as swiftcord. Learn More€1.95