5 - Genoa sheet
Important rope characteristics for a genoa sheet are: low elongation, good grip, and flexibility. Grip end flexibility are particularly important for yachts/ dinghies up to 30 ft, were there is still a lot of manual rope work (vs. winch). Low elongation is required for properly trimming your sail: when wind increases, sail should stay flat. Ropes with Stirotex® or Dyneema®cores are in this case recommended. If heat develops on the winches, check out our TN racing with Technora cover.
Suggested length, click here
Suggested diameter, click here
-
DX TrimSKU: PRR410
Application: Dinghy halyard, Control line
DX Trim is a high performance rope with Dyneema® fibers for dinghy sailors. Very stiff and round line with a great durability.
Learn More -
DX Cup GripSKU: PRR432
Application: Halyard, Sheet, Control line
This ultra high performance regatta rope, has a core made of coated Dyneema® Sk78 fibers and special cover. The cover is a mix of HT Polyester and special fiber, providing an unmatched grip, soft feel and durability. Other features: Suitable for splicing and tapering, very low stretch, light weight. Excellent for control lines, sheets and spi-halyards
Learn More -
TN RacingSKU: PRR340
Application: Halyard, Sheet, Control line
This is an high-performance regatta rope and has a core of coated Stirotex fibers. The Technora/polyester cover is suitable for big winches and works very well in clutches. This rope is suitable for splicing and tapering.
Learn More