RS Feva halyards, sheets and trimlines
The RS Feva is a fast and responsive dinghy. To get the most out of the boat, the line setup needs to be right. Correct diameters, low stretch and good grip make a clear difference on the water.
On this page you’ll find a complete and practical overview of halyards, sheets and trimlines for the RS Feva. All recommendations are based on real use and proven setups.
Standard delivery is without splicing options. Spliced ends or special finishing is possible.
Complete line plan for RS Feva
Small adjustments matter on a boat like the RS Feva. Lines that stretch too much reduce control. Lines that are too thick add friction. Lines with poor grip make trimming harder than it should be.
This line plan gives you a solid starting point for training, club racing and regatta sailing. Regatta options are listed separately where a higher grip or more direct feel is preferred.
| line | diameter mm | length m | type |
|---|---|---|---|
| Main halyard | 4-5 | 10 | Softline |
| Jib halyard | 4 | 6,5 | S Cup |
| Gennaker halyard | 3-4 | 13,5 | S Cup |
| Mainsheet bridle | 4 | 5 | S Core |
| Mainsheet | 6 | 9,5 | S Cup |
| Mainsheet (regatta) | 6 | 9,5 | Race Grip Pro |
| Jibsheet | 6 | 5 | S Cup |
| Jibsheet (regatta) | 6 | 5 | Race Grip Pro |
| Gennaker sheet | 6 | 7,5 | S Cup |
| Gennaker sheet (regatta) | 6 | 7,5 | Race Grip Pro |
| Retractable bowspirit line | 4 | 3 | S Cup |
| Boom strop | 6 | 1 | S Cup |
| outhaul part 1 | 4 | 3 | S Cup |
| outhaul part 2 | 4 | 2 | S Core |
| vang part 1 | 4 | 3,5 | S Cup |
| vang part 2 | 4 | 1,5 | S Core |
| Capsize righting lines part 1 | 4-5 | 4,5 | Softline |
| Capsize righting lines part 2 | 4 | 4 | Elastic |
| Rudder support and secure | 4 | 3 | S Cup |
| Hiking strap part 1 | 4 | 2 | S Cup |
| Hiking strap part 2 | 4 | 3 | Elastic |
| Block lashing lines | 4 | 3 | S Cup |
| Centreboard elastic lock | 4 | 1 | Elastic |
| Transom lift handles | 4 | 0,6 | S Cup |
| Towing line | 8 | 8 | floating rescue line |
| Low friction ring 14 mm | – | 2 | low friction ring |
| Halyard ball stopper (for 4 mm line) | – | 4 | ball stopper |
Need help or custom finishing
This setup covers the most common RS Feva configurations. If you sail differently or want specific finishing, we’re happy to help.
Standard delivery is without splicing. Custom splices or special finishing are possible on request.