Swage Shroud Terminal
Hi-MOD - Petersen Shroud Terminals (also known as Spoon terminals) are exclusively manufactured at the Petersen factory in England. Forged from low carbon stainless steel AISI 316L (1.4404) every Petersen Swage Shroud Terminal is incredibly strong and light.
All Petersen shroud terminals are compatible with Gibb / Navtec 840 series backing plates and are a direct replacement for Noresman Navtec 841 shroud terminals.
Petersen has been a manufacturer of A4 stainless shroud terminals for many years and during that time has built an industry leading quality system with full material traceability.
Petersen shroud terminals can be used with many different wire-rope constructions and spiral strand. As a manufacturer of swage spoon terminals Petersen can offer you an affordable, customised shroud terminal to suit your rigging project.
|Article number||Wire(MM)||T (MM)||B (MM)||W (MM)||SD (MM)||HW (MM)|
|Diameter||3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 10 mm, 12 mm|