Blocks
Shop By
-
40mm Barber blockSKU: ATBB4012The Antal Barber Block is a snatch block designed Barberhaulers on spinnaker sheets. Learn More€169.95 €169.95
-
50mm Protexit block Through DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€148.95 €148.95
-
40mm Snatch block with shackleSKU: AT9040SHSnatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More€175.95 €175.95
-
40mm Snatch block with snapshackleSKU: AT9040SNSnatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More€246.95 €246.95
-
42mm Twin Sheave BlockSKU: ATTB4212The Antal Barber Block is a snatch block designed Barberhaulers on spinnaker sheets. Learn More€383.95 €383.95
-
60mm Protexit block Through DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
Learn More€164.95 €164.95
-
2.25" Upright Lead Block #10 (5mm) RH FastenersSKU: HK206The 2.25 in (57 mm) blocks are compact and lightweight, with fast trim and release under high or low loads. Perfect for dinghies, scows, beachcats and iceboats, as well as small offshore racers and cruisers. Learn More€84.49 €84.49
