Blocks
Shop By
-
45mm Black Magic block with becketSKU: HK3392Black Magic Air blocks are a top favorite of Big Boat performance racers and cruisers. These lightweight, free-running, powerful performers are used for sail controls that see lots of action: mainsheet, runner, halyard, and spinnaker systems. Learn More€267.95 €267.95
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€146.95 €146.95
-
40mm Zircon block with becketSKU: HK2191Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€66.99 €66.99
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€93.49 €93.49
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€126.95 €126.95
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More€161.95 €161.95
-
22mm Micro block with becketSKU: HK225Harken 22 mm Micro with becket block is compact and lightweight and can be used for lines up to 6mm. Great for smaller sailingboats and boats up to 30 foot, mostly used for trimlines and control lines. Have a working load of 91 kg and weight only 21 gram. Learn More€17.10 €17.10
-
22mm Micro shackle block with becketSKU: HK235Harken 22 mm Micro shackle block with becket is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 28 gram. Learn More€23.85 €23.85
-
22mm Micro block through - deckSKU: HK242Harken 22 mm Micro block in-dek is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 28 gram. Learn More€35.75 €35.75
-
Through-Deck Bullet Block 5mm (#10) RH FastenersSKU: HK287Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€41.75 €41.75
-
Wire through-deck Bullet Block 5mm (#10) RH FastenersSKU: HK288Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Learn More€48.75 €48.75
-
29mm Carbo block with becketSKU: HK341The 29 mm Harken Carbo block with becket can be used for lines up to 8mm. This block has a max. working load of 150 kg, a breaking load of 454 kg and weighs just 28 grams. Learn More€35.25 €35.25
-
16mm Airblock with becketSKU: HK405The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 12 gram. Learn More€20.25 €20.25
-
16mm Airblock through-deckSKU: HK421The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 18 gram. Learn More€48.75 €48.75
-
57mm Carbo ratchet block with becketSKU: HK2136Harken 57 mm Carbo ratchet block with becket. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weights 94 gram. Max workload is 227 kg and breaking strength is 907 kg. Learn More€97.99 €97.99
-
57mm single Carbo ratchet block with cam cleat and becketSKU: HK2139Harken 57 mm Carbo ratchet block with cam cleat and becket. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weights 255 gram. Max workload is 272 kg and breaking strength is 680 kg. Learn More€205.95 €205.95
-
40mm Carbo cheek/becket blockSKU: HK2163Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Learn More€42.00 €42.00
-
57mm Carbo block with becketSKU: HK2601Harken 57 mm Carbo block with becket can be used for lines up to 10 mm and weighs 96 gram. Great for main sheets and jib sheets. Has a safe working load of 359 kg and a breaking strength of 1079 kg. Learn More€66.99 €66.99
-
40mm Carbo ratchet block with becketSKU: HK2609Harken 40 mm Carbo Ratchet block are great for sheeting systems on smaller boats and trim lines on big boats. Max. line diameter for this block is 10 mm, it has a safe working load of 136 kg, a breaking strength of 454 kg and weights just 52 gram. Learn More€80.99 €80.99
-
40mm Carbo ratchet block with clamcleat and becketSKU: HK2611Harken 40mm Carbo Ratchet block are great for sheeting systems on smaller boats and trim lines on big boats. Max. line diameter for this block is 6 mm, it has a safe working load of 136 kg, a breaking strength of 272 kg and weights just 132 gram. Learn More€163.95 €163.95
