Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€146.95 €146.95
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€93.49 €93.49
-
30mm Protexit block Trough Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€113.95 €113.95
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€126.95 €126.95
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More€161.95 €161.95
-
29mm Carbo block with becketSKU: HK341The 29 mm Harken Carbo block with becket can be used for lines up to 8mm. This block has a max. working load of 150 kg, a breaking load of 454 kg and weighs just 28 grams. Learn More€35.25 €35.25
-
29mm Carbo double block with becketSKU: HK343The 29 mm Harken Carbo double block with becket can be used for lines up to 8 mm. This block has a max. working load of 299 kg, a breaking strength of 737 kg and weighs just 54 gram. Learn More€59.49 €59.49
-
29mm Carbo triple block with becketSKU: HK345The 29 mm Harken Carbo triple block with becket can be used for lines up to 8mm. This block has a max. working load of 449 kg, a breaking load of 907 kg and weighs just 77 gram. Learn More€76.99 €76.99
-
29mm Carbo triple block with cleat and becketSKU: HK347The 29 mm Harken Carbo triple block can be used for lines up to 6 mm. This block has a max working load of 408 kg, a breaking load of 816 kg and weighs just 133 grams. Learn More€130.95 €130.95
-
16mm airblock - In-line exit blockSKU: HK368The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 27 gram. Learn More€67.49 €67.49
-
16mm Airblock with becketSKU: HK405The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 12 gram. Learn More€20.25 €20.25
-
16mm Airblock double with becketSKU: HK407The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 204 kg maximum working load, a breaking load of 544 kg and it weights just 28 gram. Learn More€40.00 €40.00
-
16mm Airblock triple with becketSKU: HK409The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 318 kg maximum working load, a breaking load of 544 kg and it weights just 43 gram. Learn More€54.49 €54.49
-
16mm Airblock through-deckSKU: HK421The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 18 gram. Learn More€48.75 €48.75
-
57mm Carbo ratchet block with becketSKU: HK2136Harken 57 mm Carbo ratchet block with becket. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weights 94 gram. Max workload is 227 kg and breaking strength is 907 kg. Learn More€97.99 €97.99
-
57mm single Carbo ratchet block with cam cleat and becketSKU: HK2139Harken 57 mm Carbo ratchet block with cam cleat and becket. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weights 255 gram. Max workload is 272 kg and breaking strength is 680 kg. Learn More€205.95 €205.95
-
57mm Carbo triple ratchet block with cam cleat and becketSKU: HK2141Harken 57 mm Carbo triple ratchet block with cam cleat and becket. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weights 445 gram. Max workload is 816 kg and breaking strength is 2041 kg. Learn More€301.95 €301.95
-
40mm Carbo cheek/becket blockSKU: HK2163Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Learn More€42.00 €42.00
-
57mm Carbo block with becketSKU: HK2601Harken 57 mm Carbo block with becket can be used for lines up to 10 mm and weighs 96 gram. Great for main sheets and jib sheets. Has a safe working load of 359 kg and a breaking strength of 1079 kg. Learn More€66.99 €66.99
-
57mm Carbo double block with becketSKU: HK2603Harken 57 mm Carbo double block with becket can be used for lines up to 10 mm and weighs 187 gram. Great for mainsheets and jib sheet. Has a safe working load of 720 kg and a breaking strength of 1500 kg. Learn More€130.95 €130.95
