Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
40mm Zircon block with becketSKU: HK2191Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More
-
40mm Zircon double block with becketSKU: HK2193Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
30mm Protexit block Trough Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More -
22mm Micro block with becketSKU: HK225Harken 22 mm Micro with becket block is compact and lightweight and can be used for lines up to 6mm. Great for smaller sailingboats and boats up to 30 foot, mostly used for trimlines and control lines. Have a working load of 91 kg and weight only 21 gram. Learn More
-
22mm Micro double block with becketSKU: HK227Harken 22 mm Micro double block with becket is compact and lightweight and can be used for lines up to 6mm. Great for smaller sailingboats and boats up to 30 foot, mostly used for trimlines and control lines. Have a working load of 159 kg and weight only 43 gram. Learn More
-
22mm Micro triple block with becketSKU: HK229Harken 22 mm Micro block triple block with becket is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 227 kg and weight only 64 gram. Learn More
-
22mm Micro block triple with cam cleat and becketSKU: HK231Harken 22 mm Micro block triple block with becket is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 227 kg and weight only 99 gram. Learn More
-
22mm micro cheek blockSKU: HK233Harken 22 mm Micro cheek block is compact and lightweight and can be used for lines up to 6mm. Great for smaller sailingboats and boats up to 30 foot, mostly used for trimlines and control lines. Have a working load of 91 kg and weight only 21 gram. Learn More
-
22mm Micro shackle block with becketSKU: HK235Harken 22 mm Micro shackle block with becket is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 28 gram. Learn More
-
22mm Micro block through - deckSKU: HK242Harken 22 mm Micro block in-dek is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 28 gram. Learn More
-
22mm Micro fiddle with V-jamSKU: HK244Harken 22 mm Micro fiddle with V-jam is compact and lightweight and can be used for lines up to 6mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 57 gram. Learn More
-
Through-Deck Bullet Block 5mm (#10) RH FastenersSKU: HK287Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
Wire through-deck Bullet Block 5mm (#10) RH FastenersSKU: HK288Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Learn More
-
In-Line exit Bullet Block 5mm (#10) RH FastenersSKU: HK289Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
29mm Carbo cheek blockSKU: HK350The 29 mm Harken Carbo cheek block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 17 grams. Learn More
-
16mm airblock - In-line exit blockSKU: HK368The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 27 gram. Learn More