Blocks
Shop By
-
40mm Carbo Twing BlockSKU: HK2699Single-hand operated snatchblock based on Harken's Carbo series with 40mm sheave. Can be used for 2:1 or 1:1 barber-haulers. Learn More
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
40mm Snatch blockSKU: AT9040Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
60mm Snatch blockSKU: AT9060Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
60mm Snatch block with snapshackleSKU: AT9060SNSnatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
32mm Mini Snatch Block - rope connectionSKU: AT9030Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
60mm Snatch block with shackleSKU: AT9060SHSnatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
32mm Mini Snatch Block - shackle connectionSKU: AT9031Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
30mm Protexit block Trough Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More -
22mm Micro block through - deckSKU: HK242Harken 22 mm Micro block in-dek is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 28 gram. Learn More
-
Through-Deck Bullet Block 5mm (#10) RH FastenersSKU: HK287Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
Wire through-deck Bullet Block 5mm (#10) RH FastenersSKU: HK288Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Learn More
-
In-Line exit Bullet Block 5mm (#10) RH FastenersSKU: HK289Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
16mm airblock - In-line exit blockSKU: HK368The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 27 gram. Learn More
-
16mm Airblock through-deckSKU: HK421The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 18 gram. Learn More
-
Through-deck Dinghy Block 4mm (#8) RH FastenersSKU: HK046Low-profile Dinghy blocks are compact and lightweight, with fast trim and release under high or low loads. Blocks are designed for dinghies and for light-duty control lines on larger boats. Learn More
-
Through Deck Bullet Block 5mm (#10) FH FastenersSKU: HK088Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More