Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€146.95 €146.95
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€93.49 €93.49
-
30mm Protexit block Trough Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€113.95 €113.95
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€126.95 €126.95
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More€161.95 €161.95
-
29mm Carbo stand-up blockSKU: HK349The 29 mm Harken Carbo stand-up block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 31 grams. Learn More€27.50 €27.50
-
Through-Deck Bullet Block 5mm (#10) RH FastenersSKU: HK287Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€41.75 €41.75
-
Wire through-deck Bullet Block 5mm (#10) RH FastenersSKU: HK288Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Learn More€48.75 €48.75
-
In-Line exit Bullet Block 5mm (#10) RH FastenersSKU: HK289Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€58.99 €58.99
-
40mm Carbo stand-up blockSKU: HK2652This Harken 40 mm Carbo stand-up block is suitable for sheeting systems of small boats and trim lines for big boats. Use a max. line of 10 mm. It has a safe workload of 220 kg, a breaking strength of 735 kg and it weighs 48 gram. Learn More€42.75 €42.75
-
Double upright Bullet Block 5mm (#10) RH FastenersSKU: HK220Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€50.99 €50.99
-
Upright Big Bullet Block 5mm (#10) RH FastenersSKU: HK222Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€48.50 €48.50
-
Double upright Big Bullet Block 5mm (#10) RH FastenersSKU: HK223Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€85.99 €85.99
-
Through-deck Dinghy Block 4mm (#8) RH FastenersSKU: HK046Low-profile Dinghy blocks are compact and lightweight, with fast trim and release under high or low loads. Blocks are designed for dinghies and for light-duty control lines on larger boats. Learn More€59.49 €59.49
-
Through Deck Bullet Block 5mm (#10) FH FastenersSKU: HK088Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€28.25 €28.25
-
In-Line Exit Bullet Block 5mm (#10) FH FastenersSKU: HK089Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€44.75 €44.75
-
Upright Bullet Block 5mm (#10) RH FastenersSKU: HK096Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€28.50 €28.50
-
Wire Through Deck Bullet Block 5mm (#10) FH FastenersSKU: HK106Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Wire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance. Learn More€35.00 €35.00
-
Wire upright Bullet Block 5mm (#10) RH FastenersSKU: HK108Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Wire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance. Learn More€35.50 €35.50
-
Through-deck Big Bullet Block 5mm (#10) FH FastenersSKU: HK131Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€46.25 €46.25
