Blocks
Shop By
-
40mm Carbo Twing BlockSKU: HK2699Single-hand operated snatchblock based on Harken's Carbo series with 40mm sheave. Can be used for 2:1 or 1:1 barber-haulers. Learn More
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
30mm Protexit block Trough Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More -
Element 45mm Block stand-upSKU: HK6250Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More -
Element 45mm Block stand-up/becketSKU: HK6251Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More -
Element 60mm Block stand-upSKU: HK6277Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More -
Element 60mm Block stand-up/becketSKU: HK6278Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More -
Element 80mm Block stand-upSKU: HK6280
Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More -
22mm Micro block through - deckSKU: HK242Harken 22 mm Micro block in-dek is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 28 gram. Learn More
-
22mm Micro block uprightSKU: HK243Harken 22 mm Micro lock upright is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 28 gram. Learn More
-
22mm Micro fiddle with V-jamSKU: HK244Harken 22 mm Micro fiddle with V-jam is compact and lightweight and can be used for lines up to 6mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 57 gram. Learn More
-
29mm Carbo stand-up blockSKU: HK349The 29 mm Harken Carbo stand-up block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 31 grams. Learn More
-
Through-Deck Bullet Block 5mm (#10) RH FastenersSKU: HK287Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
Wire through-deck Bullet Block 5mm (#10) RH FastenersSKU: HK288Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Learn More
-
In-Line exit Bullet Block 5mm (#10) RH FastenersSKU: HK289Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
16mm airblock - In-line exit blockSKU: HK368The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 27 gram. Learn More
-
16mm Airblock through-deckSKU: HK421The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 18 gram. Learn More