Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
40mm Snatch blockSKU: AT9040Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
40mm Snatch block with shackleSKU: AT9040SHSnatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
40mm Snatch block with snapshackleSKU: AT9040SNSnatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
40mm Barber blockSKU: ATBB4012The Antal Barber Block is a snatch block designed Barberhaulers on spinnaker sheets. Learn More
-
56mm Dynablock Snatch for LashingSKU: ATDBL56Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
56mm Dynablock Snatch with loopSKU: ATDBS56Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
42mm Twin Sheave BlockSKU: ATTB4212The Antal Barber Block is a snatch block designed Barberhaulers on spinnaker sheets. Learn More
-
Dyneema Snap Hook 12mmSKU: ATHK12The Antal Snap Hook be easily “hooked” to a genoa or a spinnaker sheet: the lightest and strongest solution for a line control. Learn More
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More -
75mm Carbo ratchet block 2x gripSKU: HK2176Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
Learn More -
75mm Carbo ratchamatic block 2x gripSKU: HK2177Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
2x grip: breeze–on/puffs; 30:1 holding power Learn More -
Element 45mm Block stand-upSKU: HK6250Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More -
Element 45mm Block stand-up/becketSKU: HK6251Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More -
75mm Carbo block with cam cleatSKU: HK2666Harken 75mm Carbo block with cam cleat. Great block for big boats, mainly used for sheetingsystems and trimlines. Can be used for lines up to 12mm and weights 381 gram. Has a max workload of 136 kg and a breaking strength of 340 kg. Learn More
-
75mm Carbo block with cam cleat and becketSKU: HK2667Harken 75mm Carbo block with cam cleat and becket. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 12mm and weights 397 gram. Has a max workload of 272 kg and a breaking strength of 680 kg. Learn More
-
75mm Carbo triple block with cam cleatSKU: HK2668Harken 75mm Carbo triple block with cam cleat. Great block for big boats, mainly used for sheeting systems and trimlines. Can be used for lines up to 12mm and weights 788 gram. Has a max workload of 680 kg and a breaking strength of 1700 kg. Learn More
-
75mm Carbo triple block with cam cleat and becketSKU: HK2669Harken 75mm Carbo triple block with cam cleat and becket. Great block for big boats, mainly used for sheetingsystems and trimlines. Can be used for lines up to 12mm and weights 805 gram. Has a max workload of 816 kg and a breaking strength of 2040 kg. Learn More
-
75mm Carbo ratchet blockSKU: HK2670Harken 75mm Carbo ratchet block. Great block for big boats, mainly used for sheeting systems and trimlines. Can be used for lines up to 12mm and weighs 227 gram. Has a max workload of 341 kg and a breaking strength of 1361 kg. Learn More
-
75mm Carbo ratchet block with becketSKU: HK2671Harken 75mm Carbo ratchet block with becket. Great block for big boats, mainly used for sheetingsystems and trimlines. Can be used for lines up to 12mm and weighs 248 gram. Has a max workload of 341 kg and a breaking strength of 1361 kg. Learn More