Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€146.95 €146.95
-
40mm Zircon blockSKU: HK2190Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€64.99 €64.99
-
40mm Zircon block with becketSKU: HK2191Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€66.99 €66.99
-
40mm Zircon double blockSKU: HK2192Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€109.95 €109.95
-
40mm Zircon double block with becketSKU: HK2193Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€116.95 €116.95
-
57mm Zircon blockSKU: HK2195Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€75.99 €75.99
-
57mm Zircon block with becketSKU: HK2196Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€78.49 €78.49
-
57mm Zircon double blockSKU: HK2197Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€149.95 €149.95
-
57mm Zircon double block with becketSKU: HK2198Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€157.95 €157.95
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€93.49 €93.49
-
30mm Protexit block Trough Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€113.95 €113.95
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€126.95 €126.95
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More€161.95 €161.95
-
16mm airblock - In-line exit blockSKU: HK368The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 27 gram. Learn More€67.49 €67.49
-
16mm Airblock forkheadSKU: HK376The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 11 gram. Learn More€25.25 €25.25
-
16mm hook-in halyard blockSKU: HK391The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 181 kg and it weights just 13 gram. Learn More€35.00 €35.00
-
16mm AirblockSKU: HK404HHHarken's smallest 16 mm racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 10 gram. Learn More€17.40 €17.40
-
16mm Airblock with becketSKU: HK405The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 12 gram. Learn More€20.25 €20.25
-
16mm double AirblockSKU: HK406The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 204 kg maximum working load, a breaking load of 544 kg and it weights just 27 gram. Learn More€36.50 €36.50
-
16mm Airblock double with becketSKU: HK407The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 204 kg maximum working load, a breaking load of 544 kg and it weights just 28 gram. Learn More€40.00 €40.00
