Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More -
75mm Carbo ratchet block 2x gripSKU: HK2176Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
Learn More -
75mm Carbo ratchamatic block 2x gripSKU: HK2177Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
2x grip: breeze–on/puffs; 30:1 holding power Learn More -
Element 45mm Block stand-upSKU: HK6250Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More -
Element 45mm Block stand-up/becketSKU: HK6251Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More -
75mm Carbo block with cam cleatSKU: HK2666Harken 75mm Carbo block with cam cleat. Great block for big boats, mainly used for sheetingsystems and trimlines. Can be used for lines up to 12mm and weights 381 gram. Has a max workload of 136 kg and a breaking strength of 340 kg. Learn More
-
75mm Carbo block with cam cleat and becketSKU: HK2667Harken 75mm Carbo block with cam cleat and becket. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 12mm and weights 397 gram. Has a max workload of 272 kg and a breaking strength of 680 kg. Learn More
-
75mm Carbo triple block with cam cleatSKU: HK2668Harken 75mm Carbo triple block with cam cleat. Great block for big boats, mainly used for sheeting systems and trimlines. Can be used for lines up to 12mm and weights 788 gram. Has a max workload of 680 kg and a breaking strength of 1700 kg. Learn More
-
75mm Carbo triple block with cam cleat and becketSKU: HK2669Harken 75mm Carbo triple block with cam cleat and becket. Great block for big boats, mainly used for sheetingsystems and trimlines. Can be used for lines up to 12mm and weights 805 gram. Has a max workload of 816 kg and a breaking strength of 2040 kg. Learn More
-
75mm Carbo ratchet blockSKU: HK2670Harken 75mm Carbo ratchet block. Great block for big boats, mainly used for sheeting systems and trimlines. Can be used for lines up to 12mm and weighs 227 gram. Has a max workload of 341 kg and a breaking strength of 1361 kg. Learn More
-
75mm Carbo ratchet block with becketSKU: HK2671Harken 75mm Carbo ratchet block with becket. Great block for big boats, mainly used for sheetingsystems and trimlines. Can be used for lines up to 12mm and weighs 248 gram. Has a max workload of 341 kg and a breaking strength of 1361 kg. Learn More
-
75mm Carbo Cheek Ratchet blockSKU: HK2672Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Learn More
-
75mm Carbo automatic ratchet blockSKU: HK2680Harken 75mm Carbo automatic ratchet block. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 12mm and weights 238 gram. Has a max workload of 341 kg and a breaking strength of 1361 kg. Learn More
-
75mm Carbo automatic ratchet block with becketSKU: HK2681Harken 75mm Carbo automatic ratchet block with becket. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 12mm and weighs 255 gram. Has a max workload of 341 kg and a breaking strength of 1361 kg. Learn More
-
75mm Carbo cheek block with automatic ratchet blockSKU: HK2682Harken 75 mm Carbo cheek block with automatic ratchet block. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 12 mm and weighs 184 gram. Has a max workload of 341 kg and a breaking strength of 1361 kg. Learn More
-
75mm Carbo automatic ratchet block with cam cleatSKU: HK2683Harken 75mm Carbo automatic ratchet block with cam cleat. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 12 mm and weighs 440 gram. Has a max workload of 136 kg and a breaking strength of 340 kg. Learn More
-
75mm Carbo automatic ratchet block with cam cleat and becketSKU: HK2684Harken 75 mm Carbo automatic ratchet block with cam cleat and becket. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 12mm and weighs 440 gram. Has a max workload of 272 kg and a breaking strength of 680 kg. Learn More
-
75mm Carbo triple automatic ratchet block with cam cleatSKU: HK2685Harken 75 mm Carbo triple automatic ratchet block with cam cleat. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 12mm and weighs 879 gram. Has a max workload of 680 kg and a breaking strength of 1700 kg. Learn More
-
75mm Carbo triple automatic ratchet block cam cleat and becketSKU: HK2686Harken 75 mm Carbo triple automatic ratchet block with cam cleat and becket. Great block for big boats, mainly used for sheeting systems and trim lines. Can be used for lines up to 12mm and weighs 896 gram. Has a max workload of 816 kg and a breaking strength of 2041 kg. Learn More