Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€146.95 €146.95
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€93.49 €93.49
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€126.95 €126.95
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More€161.95 €161.95
-
Through-Deck Bullet Block 5mm (#10) RH FastenersSKU: HK287Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€41.75 €41.75
-
Wire through-deck Bullet Block 5mm (#10) RH FastenersSKU: HK288Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Learn More€48.75 €48.75
-
16mm Airblock forkheadSKU: HK376The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 11 gram. Learn More€25.25 €25.25
-
16mm hook-in halyard blockSKU: HK391The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 181 kg and it weights just 13 gram. Learn More€35.00 €35.00
-
16mm AirblockSKU: HK404HHHarken's smallest 16 mm racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 10 gram. Learn More€17.40 €17.40
-
16mm Airblock with becketSKU: HK405The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 12 gram. Learn More€20.25 €20.25
-
16mm cheek blockSKU: HK416The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 12 gram. Learn More€20.55 €20.55
-
16mm Airblock with swivelSKU: HK417The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 339 kg and it weights just 18 gram. Learn More€31.75 €31.75
-
16mm Airblock through-deckSKU: HK421The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 18 gram. Learn More€48.75 €48.75
-
16mm Airblock cheek pivotSKU: HK432The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 339 kg and it weights just 11 gram. Learn More€21.90 €21.90
-
16mm Airblock flip flopSKU: HK437The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 21 gram. Learn More€46.25 €46.25
-
16mm Airblock with eyestrapSKU: HK442The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 12 gram. Learn More€26.50 €26.50
-
16mm Airblock narrow ferrule head blockSKU: HK467The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 4mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 339 kg and it weights just 12 gram. Learn More€20.25 €20.25
-
Upright Big Bullet Block 5mm (#10) RH FastenersSKU: HK222Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€48.50 €48.50
-
Through-deck Dinghy Block 4mm (#8) RH FastenersSKU: HK046Low-profile Dinghy blocks are compact and lightweight, with fast trim and release under high or low loads. Blocks are designed for dinghies and for light-duty control lines on larger boats. Learn More€59.49 €59.49
-
Through Deck Bullet Block 5mm (#10) FH FastenersSKU: HK088Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€28.25 €28.25
