Blocks
-
40mm Carbo Twing BlockSKU: HK2699Single-hand operated snatchblock based on Harken's Carbo series with 40mm sheave. Can be used for 2:1 or 1:1 barber-haulers. Learn More
-
50mm Protexit block Through DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
30mm Protexit block Through DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
30mm Protexit block Through Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
40mm Protexit block Through DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
60mm Protexit block Through DeckSKU: HK1204
When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
Learn More -
T2 40/18mm Carbo T2 blockSKU: HK2162The 18 mm block features stainless steel ball bearings and an integrated stainless inner race and rivet for optimal strength-to-weight. The 40 mm blocks feature composite sheaves that spin freely on Delrin® ball bearings with curved bearing races. Learn More
-
29mm Carbo stand-up blockSKU: HK349The 29 mm Harken Carbo stand-up block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 31 grams. Learn More
-
29mm Carbo blockSKU: HK340The 29 mm Harken Carbo block can be used for lines up to 8mm. This block has a max. working load of 150 kg, a breaking load of 454 kg and weighs just 26 grams. Learn More
-
29mm Carbo block with becketSKU: HK341The 29 mm Harken Carbo block with becket can be used for lines up to 8mm. This block has a max. working load of 150 kg, a breaking load of 454 kg and weighs just 28 grams. Learn More
-
29mm Carbo double blockSKU: HK342The 29 mm Harken Carbo double block can be used for lines up to 8 mm. This block has a max. working load of 299 kg, a breaking load of 737 kg and weighs just 51 grams. Learn More
-
29mm Carbo double block with becketSKU: HK343The 29 mm Harken Carbo double block with becket can be used for lines up to 8 mm. This block has a max. working load of 299 kg, a breaking strength of 737 kg and weighs just 54 gram. Learn More
-
29mm Carbo triple blockSKU: HK344The 29 mm Harken Carbo triple block can be used for lines up to 8mm. This block has a max. working load of 449 kg, a breaking load of 907 kg and weighs just 74 gram. Learn More
-
29mm Carbo triple block with becketSKU: HK345The 29 mm Harken Carbo triple block with becket can be used for lines up to 8mm. This block has a max. working load of 449 kg, a breaking load of 907 kg and weighs just 77 gram. Learn More
-
29mm Carbo triple block with cleatSKU: HK346The 29 mm Harken Carbo triple block can be used for lines up to 6 mm. This block has a max working load of 340 kg, a breaking load of 680 kg and weighs just 130 grams. Learn More
-
29mm Carbo triple block with cleat and becketSKU: HK347The 29 mm Harken Carbo triple block can be used for lines up to 6 mm. This block has a max working load of 408 kg, a breaking load of 816 kg and weighs just 133 grams. Learn More
-
29mm Carbo fixed blokSKU: HK348The 29 mm Harken Carbo fixed block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 23 grams. Learn More
-
29mm Carbo cheek blockSKU: HK350The 29 mm Harken Carbo cheek block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 17 grams. Learn More
-
29mm Carbo 90° fixed head blockSKU: HK352The 29 mm Harken Carbo fixed head block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 26 grams. Learn More
-
29mm Carbo barberhaul / traveler blockSKU: HK353The 29 mm Harken Carbo traveller / barber haul block can be used for lines up to 8 mm. This block has a max. working load of 150 kg, a breaking load of 454 kg and weighs just 34 grams. Learn More