Blocks
-
Low Friction RingsSKU: PRH130Low Friction rings are simple aluminum rings which can be spliced into lines. They are used to deflect sheets and control lines or for lashings. They are made of high strength aluminum. Available in 6 different sizes. Learn More
-
50mm Protexit block Through DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
80mm Plain Bearing Cheek BlockSKU: SE40800115RPLAIN BEARING BLOCKS Great performance in applications with heavy and static loads. Available in 20, 40, 50, 60, 70, 80 and 100 mm sheave diameters. Learn More
-
80mm Plain Bearing Cheek Block with lockSKU: SE40800118RPLAIN BEARING BLOCKS Great performance in applications with heavy and static loads. Available in 20, 40, 50, 60, 70, 80 and 100 mm sheave diameters. Learn More
-
80mm Plain Bearing Cheek Block with lock (Clockwise)SKU: SE40800121RPLAIN BEARING BLOCKS Great performance in applications with heavy and static loads. Available in 20, 40, 50, 60, 70, 80 and 100 mm sheave diameters. Learn More
-
100mm Plain Bearing Cheek BlockSKU: SE41000115RPLAIN BEARING BLOCKS Great performance in applications with heavy and static loads. Available in 20, 40, 50, 60, 70, 80 and 100 mm sheave diameters. Learn More
-
20mm Ball Bearing Cheek BlockSKU: SE40210113R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
44mm Dynablock Snatch for LashingSKU: ATDBL44Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
56mm Dynablock Snatch for LashingSKU: ATDBL56Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
44mm Dynablock Snatch with loopSKU: ATDBS44Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
56mm Dynablock Snatch with loopSKU: ATDBS56Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
30mm Protexit block Through DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
30mm Protexit block Through Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
40mm Protexit block Through DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
60mm Protexit block Through DeckSKU: HK1204
When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
Learn More -
60mm Plain Bearing Double Cheek BlockSKU: SE40600120RPLAIN BEARING BLOCKS Great performance in applications with heavy and static loads. Available in 20, 40, 50, 60, 70, 80 and 100 mm sheave diameters. Learn More
-
80mm Plain Bearing Double Cheek Block with lockSKU: SE40800119RPLAIN BEARING BLOCKS Great performance in applications with heavy and static loads. Available in 20, 40, 50, 60, 70, 80 and 100 mm sheave diameters. Learn More
-
80mm Plain Bearing Double Cheek BlockSKU: SE40800120RPLAIN BEARING BLOCKS Great performance in applications with heavy and static loads. Available in 20, 40, 50, 60, 70, 80 and 100 mm sheave diameters. Learn More
-
80mm Plain Bearing Double Cheek Block with lock (Clockwise)SKU: SE40800122RPLAIN BEARING BLOCKS Great performance in applications with heavy and static loads. Available in 20, 40, 50, 60, 70, 80 and 100 mm sheave diameters. Learn More
-
100mm Plain Bearing Double Cheek BlockSKU: SE41000116RPLAIN BEARING BLOCKS Great performance in applications with heavy and static loads. Available in 20, 40, 50, 60, 70, 80 and 100 mm sheave diameters. Learn More