Blocks
-
40mm Carbo Twing BlockSKU: HK2699Single-hand operated snatchblock based on Harken's Carbo series with 40mm sheave. Can be used for 2:1 or 1:1 barber-haulers. Learn More
-
20mm Ball Bearing Triple BlockSKU: SE40210105R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
20mm Ball Bearing Triple Block with CamSKU: SE40210107R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
20mm Ball Bearing Block with StrapSKU: SE40210101R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
32mm Mini Snatch Block - rope connectionSKU: AT9030Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
32mm Mini Snatch Block - shackle connectionSKU: AT9031Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
20mm Ball Bearing Double BlockSKU: SE40210103R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
22mm Micro block through - deckSKU: HK242Harken 22 mm Micro block in-dek is compact and lightweight and can be used for lines up to 6 mm. Great for smaller sailing boats and boats up to 30 foot, mostly used for trim lines and control lines. Have a working load of 91 kg and weight only 28 gram. Learn More
-
Through-Deck Bullet Block 5mm (#10) RH FastenersSKU: HK287Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
Wire through-deck Bullet Block 5mm (#10) RH FastenersSKU: HK288Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Learn More
-
In-Line exit Bullet Block 5mm (#10) RH FastenersSKU: HK289Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
16mm airblock - In-line exit blockSKU: HK368The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 27 gram. Learn More
-
16mm Airblock through-deckSKU: HK421The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 18 gram. Learn More
-
Through-deck Dinghy Block 4mm (#8) RH FastenersSKU: HK046Low-profile Dinghy blocks are compact and lightweight, with fast trim and release under high or low loads. Blocks are designed for dinghies and for light-duty control lines on larger boats. Learn More
-
Through Deck Bullet Block 5mm (#10) FH FastenersSKU: HK088Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
In-Line Exit Bullet Block 5mm (#10) FH FastenersSKU: HK089Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
Wire Through Deck Bullet Block 5mm (#10) FH FastenersSKU: HK106Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Wire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance. Learn More
-
Through-deck Big Bullet Block 5mm (#10) FH FastenersSKU: HK131Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
In-Line Exit Big Bullet Block 5mm (#10) FH FastenersSKU: HK134Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
30mm Ball Bearing Block Through DeckSKU: SE40310122RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters. Learn More