Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
40mm Zircon blockSKU: HK2190Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More
-
40mm Zircon block with becketSKU: HK2191Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More
-
40mm Zircon double blockSKU: HK2192Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More
-
40mm Zircon double block with becketSKU: HK2193Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More
-
57mm Zircon blockSKU: HK2195Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More
-
57mm Zircon block with becketSKU: HK2196Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More
-
57mm Zircon double blockSKU: HK2197Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More
-
57mm Zircon double block with becketSKU: HK2198Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
30mm Protexit block Trough Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More -
Series 55 Ball Bearing Orbit Block Single RF55101SKU: RF55101Easily fitted and securely retained Dyneema Link head. Learn More
-
Series 55 BB Orbit Block, Single, Becket, Swivel head RF55110SKU: RF55110Swivel shackle head for unlimited block rotation. Stainless steel shackle head and compatibility with sharp fixing points. Ultra low profile integrated becket. Learn More
-
Series 55 Ball Bearing Orbit Block Single, becket RF55111SKU: RF55111Easily fitted and securely retained Dyneema Link head
Ultra low profile becket Learn More -
Series 55 BB Orbit Block, Cheek RF55151SKU: RF55151Cheek block with recessed underside to suit cruved mounting surface Learn More
-
Series 55 BB Orbit Block, Upright Lead RF55171SKU: RF55171• Mainsheet systems on dinghies, sportsboats and small keelboats to 9m (30ft)
• Halyard, Vang and Backstay application on boats to 8m (26ft)
• Control line applications on larger yachts Learn More -
Series 55 Ball Bearing Orbit Block Double RF55201SKU: RF55201Easily fitted and securely retained Dyneema Link head. Single inner cheeks for minimum Weight & compactness Learn More
-
Series 55 Ball Bearing Orbit Block Triple RF55301SKU: RF55301Easily fitted and securely retained Dyneema® Link head. Single inner cheeks for minimum Weight & compactness Learn More