Hardware
Check out our sailing hardware of brands like Harken, Ronstan, Tylaska, Spinlock, Wichard and Selden. We sell the whole range of blocks, clutches, cleats, furling systems, fittings, deck organizers and winches you may need for your sailing boat. Did you not find the product you were looking for? Just contact us.
-
Clamcleat Tapered Pad for CL204 & CL222SKU: CL802The Clamcleat CL802 Tapered Pad aids rope alignment. Tapered Pad for CL204, CL222 and CL222AN. Can be used either way round, or stacked. Learn More
-
Clamcleat Tapered Pad for CL209 & CL254SKU: CL803The Clamcleat CL803 Tapered Pad aids rope alignment. Tapered Pad for CL209, CL254and CL254AN. Can be used either way round, or stacked. Learn More
-
Clamcleat Tapered Pad for CL201 & CL219SKU: CL804The Clamcleat CL804 Tapered Pad aids rope alignment. Tapered Pad for CL201, CL219, CL219AN, CL237 and CL238. Can be used either way round, or stacked. Learn More
-
Clamcleat Tapered Pad for CL205SKU: CL805The Clamcleat CL805 Tapered Pad aids rope alignment. Tapered Pad for CL205, CL220, CL239 and CL240. Can be used either way round, or stacked. Learn More
-
Clamcleat Keeper for CL203 & Mk1 JuniorsSKU: CL814This accessory expands the capability of conventional Clamcleat® rope cleats. The Award Winning Keeper has been designed to overcome the problem of lines being cleated accidentally as well as improving performance by holding lightly-loaded lines in the jaws of a cleat when mounted upside down. Learn More
-
Clamcleat Keeper for Mk2 Racing JuniorsSKU: CL815This accessory expands the capability of conventional Clamcleat® rope cleats. The Award Winning Keeper has been designed to overcome the problem of lines being cleated accidentally as well as improving performance by holding lightly-loaded lines in the jaws of a cleat when mounted upside down. Learn More
-
Clamcleat Cage for CL814SKU: CL816The Cage is an accessory that allows ropes to be cleated and uncleated at an angle of up to 70 degrees, rather than only in line with the cleat. Learn More
-
Clamcleat Cage for CL815SKU: CL817The Clamcleat Cage CL817 is an accessory that allows ropes to be cleated and uncleated at an angle of up to 70 degrees, rather than only in line with the cleat. Learn More
-
Clamcleat Tapered Pad for CL203 & Mk1 JuniorsSKU: CL818The Clamcleat® CL818 Tapered Pad aids correct rope/cleating alignment. It can allow tensioning without rubbing the rope over the cleat teeth. Learn More
-
Clamcleat Tapered Pad for CL211 Mk2 & Mk2 Racing cleatsSKU: CL819The Clamcleat® CL819 Tapered Pad aids correct rope/cleating alignment. It can allow tensioning without rubbing the rope over the cleat teeth. Learn More
-
Clamcleat Handle for CL253 Trapeze cleatSKU: CL834
The CL834 Trapeze Handle is light weight, just the right size and very comfortable to use. Fits the silver CL253 and hard anodised CL253AN.
Learn More -
Clamcleat Side-Entry Port 2-5mm blackSKU: CL214Clamcleat® CL214 Leech Line Cleat is a low profile black nylon cleat, for sewing or riveting onto sails and technical fabrics. It can be mounted in two positions on the sail. Learn More
-
Fender Inflation AdaptorSKU: F500001The DAN-FENDER inflation adaptor can be used on all our products having the metal valve except the Light fenders and soft, inflatable mini-buoys. Learn More
-
Hand pumpSKU: F950100The small and efficient DAN-FENDER hand-pump works very well for inflating smaller fenders and buoys or if you need to inflate extra air during the season. Learn More
-
Throwbal black 9cmSKU: F59009005The hand size Throwing-ball is a small and very useful product designed for the larger commercial vessels having heavy mooring-lines which cannot directly be thrown to the wharf or the quay.
Learn More -
FenderStepSKU: F54151FenderStep™ has become a much larger success than expected when it was launched in 2002, as it provides the simple double function of being both a boarding step but also a practical fender.
Learn More -
Cylinder Fender Heavy DutySKU: F53You need quality fenders for the best possible protection of your valuable boat!
Learn More -
Fender2stepSKU: F54152Fender2step™ was developed from the proven and very successful FenderStep™ but also provides an extra step which is really helpful not only for boats with very high topsides, but also on regular sized boats to allow children to safely get on and off and in making boarding from a dinghy even easier.
Learn More -
Ball Fender Heavy DutySKU: F55DAN-FENDER Heavy Duty fenders, proven quality and durability since 1982.
These Heavy Duty Balloon Fenders are designed to ensure maximum protection for your yacht or boat.
Learn More