Blocks
Shop By
-
Bullet Block Wire CheekSKU: HK109Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Wire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance. Learn More
-
30mm Ball Bearing Cheek BlockSKU: SE40310109RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters. Learn More -
40mm Ball Bearing Fiddle BlockSKU: SE40410112RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters. Learn More -
40mm Ball Bearing Cheek BlockSKU: SE40410117RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters. Learn More -
Series 20 BB Block, Single Cheek, Rivet MountSKU: RF20151ASuitable for screw or pop rivet mounting Learn More
-
Series 30 BB Orbit Block, Cheek Block RF35151SKU: RF35151Base suits curved mounting base Learn More
-
Series 40 BB Orbit Block, Cheek RF45151SKU: RF45151Base suits curved mounting surface. Low mounting points for maximum strength Learn More
-
Series 40 Ball Bearing Orbit Block Fiddle RF45501SKU: RF45501Easily fitted and securely retained Dyneema® Link head
Convert to a becket version by adding a Dyneema® link Learn More -
Series 40 RTA OrbitBlock,Cheek,Clockwise RotationSKU: RF46151Clockwise rotation. Fully automatic, load sensing ratchet engagement. Recessed underside to suit curved mounting surface. Low mounting points for maximum strength Learn More
-
Series 40 RTA OrbitBlock, Cheek, Anti-Clockwise RotationSKU: RF46151AAnti-clockwise rotation. Fully automatic, load sensing ratchet engagement. Recessed underside to suit curved mounting surface. Low mounting points for maximum strength Learn More
-
Series 55 BB Orbit Block, Cheek RF55151SKU: RF55151Cheek block with recessed underside to suit cruved mounting surface Learn More
-
Series 55 Ball Bearing Orbit Block Fiddle* RF55501SKU: RF55501Becket fiddle blocks use a Dyneema® Link attachment for the sheet termination and are suitable for both spliced and un-spliced lines. If you need additional purchase, a becket take-off can be simply added to any fiddle block version just by adding a Dyneema® Link. Learn More
-
Series 55 RT Orbit Block, Cheek, Clockwise Rotation RF56151SKU: RF56151• Up to 20:1 holding power
• Smooth easing of sheets
• High performance cleating
• Automatic & manual ratchet block Learn More -
Series 55 RT Orbit Block, Cheek Anti-Clockwise Rotation RF56151ASKU: RF56151AAutomatic & manual ratchet block Learn More
-
Standard Midrange Block FiddleSKU: HK1559Midrange blocks' robust construction makes them ideal to handle the high loads found on medium and large offshore boats. Sheave runs exclusively on a ball bearing system for fast trim and release under any load. Learn More