Blocks
Shop By
-
Low Friction RingsSKU: PRH130Low Friction rings are simple aluminum rings which can be spliced into lines. They are used to deflect sheets and control lines or for lashings. They are made of high strength aluminum. Available in 6 different sizes. Learn More
-
Lead RingSKU: HK32Harken® Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6 aluminum for a smooth, slippery surface, and with no moving parts, wear is minimal. Learn More
-
Through-deck Dinghy Block 4mm (#8) RH FastenersSKU: HK046Low-profile Dinghy blocks are compact and lightweight, with fast trim and release under high or low loads. Blocks are designed for dinghies and for light-duty control lines on larger boats. Learn More
-
Through-deck Big Bullet Block 5mm (#10) FH FastenersSKU: HK131Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
In-Line Exit Big Bullet Block 5mm (#10) FH FastenersSKU: HK134Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More
-
40mm Ball Bearing Block Through DeckSKU: SE40410122RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters. Learn More -
40mm Ball Bearing Lead BlockSKU: SE40410123R
BALL BEARING BLOCKS
Learn More
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters. -
40mm Ball Bearing Double Through Deck BlockSKU: SE40410124RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters. Learn More -