Blocks
-
20mm Ball Bearing Block Through DeckSKU: SE40210117R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
20mm Ball Bearing dubbel Block Through DeckSKU: SE40210118R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
44mm Dynablock Snatch for LashingSKU: ATDBL44Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
56mm Dynablock Snatch for LashingSKU: ATDBL56Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
44mm Dynablock Snatch with loopSKU: ATDBS44Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More
-
56mm Dynablock Snatch with loopSKU: ATDBS56Snatch blocks are special that they can be opened and closed simply by rotating their cheekplates. This simple fact makes them suitable for maneuvers which are fitted out before the block is placed, such as genoa and spinnaker sheets or mainsail halyard. Learn More