Blocks
Shop By
-
40mm Carbo Twing BlockSKU: HK2699Single-hand operated snatchblock based on Harken's Carbo series with 40mm sheave. Can be used for 2:1 or 1:1 barber-haulers. Learn More€89.99 €89.99
-
20mm Ball Bearing Block with SwivelSKU: SE40210109RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More€19.50 €19.50
-
20mm Ball Bearing Cheek BlockSKU: SE40210113RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More€11.40 €11.40
-
20mm Ball Bearing Stand-Up BlockSKU: SE40210114RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More€15.45 €15.45
-
20mm Ball Bearing Stand-Up Double BlockSKU: SE40210115RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More€39.25 €39.25
-
20mm Ball Bearing Lead BlockSKU: SE40210116RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More€19.50 €19.50
-
20mm Ball Bearing Block Through DeckSKU: SE40210117RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More€22.80 €22.80
-
20mm Ball Bearing Block with StrapSKU: SE40210101RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More€14.85 €14.85
-
57mm Carbo T2 ratchamatic block 2x gripSKU: HK2170Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip. Learn More€94.49 €94.49
-
S20 Single block for soft attachmentSKU: SE40210160RThe S20 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. This block weights only 9 gram and is suitable for a line up to 6mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Rope not included. Learn More€19.20 €19.20
-
S20 Single block for soft attachment with lineSKU: SE40210162RThe S20 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. Attach the block with the supplied ready-made spliced loop. This block weights only 45 gram and is suitable for a line up to 6mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Learn More€24.90 €24.90
-
S30 Single block for soft attachmentSKU: SE40310160RThe S30 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. This block weights only 18 gram and is suitable for a line up to ø7mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Rope not included. Learn More€27.50 €27.50
-
S30 Single block for soft attachment with line & insertSKU: SE40310162RThe S30 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. Attach the block with the supplied ready-made spliced loop and insert. This block weights only 69 gram and is suitable for a line up to 7mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Learn More€35.00 €35.00
-
S40 Single block for soft attachmentSKU: SE40410160RThe S40 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. This block weights only 47 gram and is suitable for a line up to 10mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Rope not included. Learn More€38.50 €38.50
-
S40 Single block for soft attachment with line & insertSKU: SE40410162RThe S40 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. Attach the block with the supplied rope and insert. This block weights only 128 gram and is suitable for a line up to 8mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Learn More€48.75 €48.75
-
20mm Ball Bearing Block with Strap & BecketSKU: SE40210102RBALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More€16.95 €16.95
-
29mm Carbo stand-up blockSKU: HK349The 29 mm Harken Carbo stand-up block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 31 grams. Learn More€27.50 €27.50
-
29mm Carbo fixed blokSKU: HK348The 29 mm Harken Carbo fixed block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 23 grams. Learn More€17.55 €17.55
-
29mm Carbo cheek blockSKU: HK350The 29 mm Harken Carbo cheek block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 17 grams. Learn More€17.40 €17.40
-
29mm Carbo 90° fixed head blockSKU: HK352The 29 mm Harken Carbo fixed head block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 26 grams. Learn More€23.40 €23.40
