Blocks
Shop By
-
75mm Carbo ratchamatic block 2x gripSKU: HK2177Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
2x grip: breeze–on/puffs; 30:1 holding power Learn More -
57mm Carbo HTE ratchamatic blockSKU: HK2625HTEThe Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
The spring on the HTE (high-threshold engage) version of the 57 mm Carbo Ratchamatic blocks was made stiffer to delay the point where the ratchet engages, allowing the block to run free more of the time. The ratchet function engages at higher loads to allow the old kite sheet to run free for crisper gybes.
Standard grip: medium/light air; 10:1 holding power. Learn More -
S20 Single block for soft attachmentSKU: SE40210160RThe S20 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. This block weights only 9 gram and is suitable for a line up to 6mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Rope not included. Learn More
-
S20 Single block for soft attachment with lineSKU: SE40210162RThe S20 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. Attach the block with the supplied ready-made spliced loop. This block weights only 45 gram and is suitable for a line up to 6mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Learn More
-
S30 Single block for soft attachmentSKU: SE40310160RThe S30 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. This block weights only 18 gram and is suitable for a line up to 8mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Rope not included. Learn More
-
S30 Single block for soft attachment with line & insertSKU: SE40310162RThe S30 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. Attach the block with the supplied ready-made spliced loop and insert. This block weights only 69 gram and is suitable for a line up to 8mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Learn More
-
S40 Single block for soft attachmentSKU: SE40410160RThe S40 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. This block weights only 47 gram and is suitable for a line up to 10mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Rope not included. Learn More
-
S40 Single block for soft attachment with line & insertSKU: SE40410162RThe S40 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. Attach the block with the supplied rope and insert. This block weights only 128 gram and is suitable for a line up to 8mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Learn More
-
20mm Ball Bearing Block with Strap & BecketSKU: SE40210102R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
29mm Carbo stand-up blockSKU: HK349The 29 mm Harken Carbo stand-up block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 31 grams. Learn More
-
29mm Carbo blockSKU: HK340The 29 mm Harken Carbo block can be used for lines up to 8mm. This block has a max. working load of 150 kg, a breaking load of 454 kg and weighs just 26 grams. Learn More
-
29mm Carbo block with becketSKU: HK341The 29 mm Harken Carbo block with becket can be used for lines up to 8mm. This block has a max. working load of 150 kg, a breaking load of 454 kg and weighs just 28 grams. Learn More
-
29mm Carbo fixed blokSKU: HK348The 29 mm Harken Carbo fixed block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 23 grams. Learn More
-
29mm Carbo cheek blockSKU: HK350The 29 mm Harken Carbo cheek block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 17 grams. Learn More
-
29mm Carbo 90° fixed head blockSKU: HK352The 29 mm Harken Carbo fixed head block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 26 grams. Learn More
-
29mm Carbo pivoting lead blockSKU: HK395The 29 mm Harken Carbo pivoting lead block can be used for lines up to 6mm. This block has a max working load of 91 kg, a breaking load of 295 kg and weighs just 90.7 grams. Learn More
-
29mm Carbo pivoting lead blockSKU: HK396The 29 mm Harken Carbo pivoting lead block can be used for lines up to 6mm. This block has a max working load of 68 kg, a breaking load of 295 kg and weighs just 83.7 grams. Learn More
-
57mm Carbo ratchet block with becketSKU: HK2136Harken 57 mm Carbo ratchet block with becket. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weights 94 gram. Max workload is 227 kg and breaking strength is 907 kg. Learn More
-
57mm Carbo cheek block with ratchetSKU: HK2137Harken 57mm Carbo turtle block with ratchet. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weighs 71 gram. Max workload is 227 kg and breaking strength is 907 kg. Learn More
-
57mm Carbo ratchet block with cam cleatSKU: HK2138Harken 57 mm Carbo ratchet block with cam cleat. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weights 247 gram. Max workload is 136 kg and breaking strength is 340 kg. Learn More