Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€146.95 €146.95
-
Series 30 HHL Orbit Block,Single & becket, lashing headSKU: RF35109HLThe Ronstan Series 30 Orbit™ Lashing block is the perfect solution for High-load cascade or vang-systems. The maximum working load is 550kgs and the breaking load is 1650kgs.
Learn More€88.49 €88.49
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€93.49 €93.49
-
30mm Protexit block Trough Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€113.95 €113.95
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More€126.95 €126.95
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More€161.95 €161.95
-
Element 45mm Block stand-upSKU: HK6250Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More€135.95 €135.95
-
Element 45mm Block stand-up/becketSKU: HK6251Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More€145.95 €145.95
-
Element 60mm Block stand-upSKU: HK6277Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More€174.95 €174.95
-
Element 60mm Block stand-up/becketSKU: HK6278Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More€186.95 €186.95
-
Element 80mm Block stand-upSKU: HK6280Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More€345.95 €345.95
-
Through-Deck Bullet Block 5mm (#10) RH FastenersSKU: HK287Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€41.75 €41.75
-
Wire through-deck Bullet Block 5mm (#10) RH FastenersSKU: HK288Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. Learn More€48.75 €48.75
-
In-Line exit Bullet Block 5mm (#10) RH FastenersSKU: HK289Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Learn More€58.99 €58.99
-
16mm airblock - In-line exit blockSKU: HK368The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 27 gram. Learn More€67.49 €67.49
-
16mm Airblock forkheadSKU: HK376The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5 mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 11 gram. Learn More€25.25 €25.25
-
16mm hook-in halyard blockSKU: HK391The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 181 kg and it weights just 13 gram. Learn More€35.00 €35.00
-
16mm AirblockSKU: HK404HHHarken's smallest 16 mm racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 10 gram. Learn More€17.40 €17.40
-
16mm Airblock with becketSKU: HK405The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 113 kg maximum working load, a breaking load of 544 kg and it weights just 12 gram. Learn More€20.25 €20.25
-
16mm double AirblockSKU: HK406The 16 mm is Harken's smallest racing block. It is perfect for small control lines (up to 5mm ) found on small sailboats and boats up to 30 foot. The bearing system uses stainless steel balls and has a 204 kg maximum working load, a breaking load of 544 kg and it weights just 27 gram. Learn More€36.50 €36.50
