Tracks & Cars
Tracks and cars for sailing boats from Harken and Ronstan for mainsheet and self-tacking jib travellers. These traveller systems are great for optimising sail trim. It's important that they quickly respond to changing conditions and getting the right balance from the loads on sails, rig and foils. Can't find what you are looking for? Please contact us.
Shop By
-
CB cars pivoting shackle (micro)SKU: HK2700Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More
-
CB cars Pivoting shackle / control blocks (micro)SKU: HK2701Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More
-
CB cars Pivoting shackle / tangs (micro)SKU: HK2702Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Learn More
-
CB cars Loop (micro)SKU: HK2703Harken® ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Loop cars matched with Carbo T2 Air blocks attached with high-tech line provide the ultimate lightweight, low-profile system. Learn More
-
CB car control block pair (micro)SKU: HK270416 mm control blocks spin on stainless steel balls that roll freely under high loads. Learn More
-
CB car control tang pair (micro)SKU: HK2705Use the 2705 control tang set for 1:1 purchase (no end controls necessary). Learn More
-
Dinghy bail/pinstop jib lead carHK450SKU: HK450These easy-to-adjust cars combine a spring-loaded pinstop with precise track spacing. Use on dinghies and small sport boats with jibs up to 140 ft² (13 m²). Learn More
-
Track low-beam/pinstop holes HK453.12SKU: HK45312Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More
-
Track low-beam/pinstop holes HK453.15SKU: HK45315Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More
-
Track low-beam/pinstop holes HK453.18SKU: HK45318Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More
-
Track low-beam/pinstop holes HK453.24SKU: HK45324Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More
-
Track low-beam/pinstop holes HK453.9.5SKU: HK45395Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Learn More
-
Series 22 Track, Black, 996 mm M6 CSK fastener holes. Pitch=100mm Stop hole pitch=50mmSKU: RC122010BALL BEARING & SLIDE ROD TRAVELLER SYSTEMS
Series 22mm, Track Learn More -
Series 22 Track, Black, 1996 mm M6 CSK fastener holes. Pitch=100mm Stop hole pitch=50mmSKU: RC122020BALL BEARING & SLIDE ROD TRAVELLER SYSTEMS
Series 22mm, Track Learn More -
Series 22 Traveller Car, 125mm, Shackle, 2xM6 HolesSKU: RC12204BALL BEARING & SLIDE ROD TRAVELLER SYSTEMSSeries 22mm, Cars Learn More
-
Series 22 Traveller Car, 125mm, 2 Control SheavesSKU: RC12210BALL BEARING & SLIDE ROD TRAVELLER SYSTEMSSeries 22mm, Cars Learn More
-
Series 22 Genoa Car, 165mm, Control SheaveSKU: RC12231BALL BEARING & SLIDE ROD TRAVELLER SYSTEMS Learn More
-
Series 22 End Cap, Plastic, 30mm x 27mmSKU: RC12280BALL BEARING BATTEN CAR SYSTEM Series 22mm, Track Learn More
-
Series 22 Adjustable Stop, 57mmSKU: RC12283BALL BEARING & SLIDE ROD TRAVELLER SYSTEMS
Series 22mm, Control Ends Learn More -
Series 22 Control End, Single SheaveSKU: RC12284BALL BEARING & SLIDE ROD TRAVELLER SYSTEMS
Series 22mm, Control Ends Learn More